Beli Pahat Radius di monotaro.id
/P102908721-1.jpg)
/ftP105262569-10.jpg)
/cfP103623447-1.jpg)
/kcP105266732-10.jpg)
/P102549324-1.jpg)
/P102549333-1.jpg)
Kami Menampilkan Rekomendasi Kami Untuk Anda! Anda Bisa Membelinya Kapan Saja di monotaro.id
NACHI Mata Bor Frais Radius DLCDeskripsi:This end mill is suitable for used for corner radius milling or copying of Aluminumatribut:- Number of Blades: 2
- Coating: DLC coat
- Helix Angle: Strong twist
- Material: Cemented carbide
- CLEVELAND Finishing Coated Carbide Corner-Radius End MillDeskripsi:Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.atribut:
- Cutting Direction: Right Hand
- Drilling Tool Configuration: Individual
- End Mill Style: Corner Radius
- Material - Machining: Carbide
- Material Grade - Machining: High Performance
- Shank Type - Machining: Straight
- Single End/Double End: Single End
- OSG General Purpose Roughing Carbide Corner-Radius End MillDeskripsi:The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.atribut:
- UNSPSC: 23172005
- Cutting Direction: Right Hand
- Drilling Tool Configuration: Individual
- End Mill Application: Roughing
- End Mill Cutting Type: Center Cutting
- End Mill Style: Corner Radius
- Material - Machining: Carbide
- Number of Flutes: 4
- Shank Type - Machining: Straight
- MICRO 100 Miniature High-Performance Carbide Corner-Radius End MillDeskripsi:The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials. Roughing/finishing end mills remove large amounts of material and create a smooth finish on the workpiece at the same time. Miniature end mills have a small diameter and provide high precision and control over material removal during detailed milling applications.atribut:
- UNSPSC: 23172005
- Cutting Direction: Right Hand
- Drilling Tool Configuration: Individual
- End Mill Application: Roughing/Finishing
- End Mill Cutting Type: Center Cutting
- End Mill Style: Corner Radius
- Material - Machining: Carbide
- Single End/Double End: Single End
- NACHI Gs Mil Radius (4 Blades)atribut:
- Number of Blades: 4
- Material: Carbide coating
- GESAC Solid Carbide Radius End MillDeskripsi:Solid Carbide Radius Endmill, For Steel.atribut:
- Product Group: Radius Endmill
- Material: Carbide
- DIJET FRM Type Radius Inserts for MIRROR Radiusatribut:
- Specifications/Standards: Corner R accuracy ± 0.010mm
- Country of Manufacture: Japan
- Material: Cemented carbide
- GESAC Solid Carbide Radius EndmillDeskripsi:2 Flute, Corner Radius.atribut:
- Type: Corner Radius
- Material: Carbide
- Mitsubishi Materials 2-Flute Mstar Radius End Mill (M)Deskripsi:For Sumi R processing
- DIJET FRM Type Radius Inserts for MIRROR Radius DH102atribut:
- Specifications/Standards: Corner R accuracy ± 0.010mm
- Country of Manufacture: Japan
- Material: Cemented carbide
- DIJET FRM Type Radius Inserts for MIRROR Radius JC8015atribut:
- Specifications/Standards: Corner R accuracy ± 0.010mm
- Country of Manufacture: Japan
- Material: Cemented carbide
- Mitsubishi Materials 2-Flute Mstar Radius End Millatribut:
- Blade Diameter D1 (phi mm): 5
- Helix Angle (°): 30
- Blade Length ap (mm): 20
- Material: Hyper-fine cemented carbide
- Shank Diameter D4 (phi mm): 6
- Corner R (mm): 0.3
- Blade Diameter Tolerance (mm): -0.015 to -0.038
- Number of Teeth: 4
- Surface Treatment: Miracle Coating
- Total Length L1 (mm): 60
- NACHI Mata Bor Frais Radius Hard GSDeskripsi:This end mill is suitable for corner R and profile milling of the Hardened Steel.atribut:
- Coating: GS
- Material: Carbide coating
- Outer Diameter Range (mm): 6-20
- Shank Diameter Tolerance (mm): h6
- Tolerance of Mill Diameter (mm): 0 to - 0.030
- Torsion Angle (°): 50
- Mitsubishi Six-Flute Impact Miracle Radius End Mill (M)atribut:
- Surface Treatment: Impact miracle coating (VF)
- NACHI Mata Bor Frais Radius X's Mill Geoatribut:
- Tolerance: -0.032 to -0.059mm
- R Tolerance: + 0.02 to -0.01mm
- Coating: Xs TiAlN coat
- Material: Cemented carbide
- Helix Angle: Strong twist
- Number of Blades: 4
- NACHI Mata Bor Frais Radius X's Mill Geoatribut:
- Helix Angle: Strong twist
- Number of Blades: 4
- Coating: Xs TiAlN coat
- Material: Cemented carbide
- R Tolerance: + 0.02 to -0.01mm
- Mitsubishi Materials 2 Blades EMSTAR Radius End Mill (M)Deskripsi:Universal 2-blade Radius end millUseable: For Sumi R processingatribut:
- Material: Ultra fine particle cemented carbide
- Shape: Radius
- Outer Diameter Tolerance: 0 to-0.020mm
- Coating: (Al, Ti) N coating
- Helix Angle: 30°
- Number of Blades: 2
- Work Material: Carbon steel, alloy steel, cast iron (<30 HRC), tool steel, prehardened steel, high hardness steel (<= 45 HRC), high hardness steel (<= 55 HRC), austenitic stainless steel, titanium alloy,
- Mitsubishi Materials 4 Blades EMSTAR Radius End Mill (M)Deskripsi:Universal 4 blade radius end millUseable: For Sumi R processingatribut:
- Material: Ultra fine particle cemented carbide
- Shape: Radius
- Coating: (Al, Ti) N coating
- Helix Angle: 30°
- Number of Blades: 4
- Work Material: Carbon steel, alloy steel, cast iron (<30 HRC), tool steel, prehardened steel, high hardness steel (<= 45 HRC), high hardness steel (<= 55 HRC), austenitic stainless steel, titanium alloy,
-
Daftar Harga Pahat Radius Terbaru September 2025
| NACHI Mata Bor Frais Radius DLC | Rp1.299.900 |
| CLEVELAND Finishing Coated Carbide Corner-Radius End Mill | Rp1.399.900 |
| OSG General Purpose Roughing Carbide Corner-Radius End Mill | Rp3.699.900 |
| MICRO 100 Miniature High-Performance Carbide Corner-Radius End Mill | Rp929.900 |
| NACHI Gs Mil Radius (4 Blades) | Rp1.299.900 |
| GESAC Solid Carbide Radius End Mill | Rp109.900 |
| DIJET FRM Type Radius Inserts for MIRROR Radius | Rp2.299.900 |
| DIJET Mirror-Radius Indexable End Mill s (Inserts for Mirror-Radius ) | Rp2.599.900 |
| GESAC Solid Carbide Radius Endmill | Rp149.900 |
| Mitsubishi Materials 2-Flute Mstar Radius End Mill (M) | Rp1.699.900 |
Data diperbarui pada 07/09/2025 (Harga belum termasuk PPN)
Buka WhatsApp